A Fixed Displacement Pump is a type of pump that delivers a consistent volume of fluid with each cycle and does not allow for variable flow adjustment. Its displacement remains constant regardless of changes in operating conditions.
Thanks to its simple design, high durability, and reliable operation, this pump is widely used in industrial applications requiring a steady and continuous flow, such as hydraulic systems, fuel delivery, cooling circuits, and chemical processing. Compared to variable displacement pumps, it requires less maintenance but offers limited adaptability in systems that demand flow modulation.
>>FEATURES
50T&150T pump have the characteristics of diminishing the whirl in the
hydraulic oil.It is quiet when operating and efficient. Suitable for being a low
pressure pump in hifh-low pressure system.
Pressure balance stucture produces lower axial loading pressure,and longer service life. Noise level is low.
Pump structure is simple and easy for maintenance.Flange mounting type could be directly connected with electric motor.
>>FEATURES
50T&150T pump have the characteristics of diminishing the whirl in the
hydraulic oil.It is quiet when operating and efficient. Suitable for being a low
pressure pump in hifh-low pressure system.
Pressure balance stucture produces lower axial loading pressure,and longer service life. Noise level is low.
Pump structure is simple and easy for maintenance.Flange mounting type could be directly connected with electric motor.
>>FEATURES
This series of vane pumps are light, huge flow capacity and compact, suitable
to working machine and special purpose machine with economics and
practicability.
The pressure adjustment from low to high is stable and efficient.
High speed running cause low temperature and wear.
Using CAM RING to offer pressure with low vibration and stable flow capacity.
Low suction resistance. There are two options for oil outlet oil and inlet with both parallel and right angle (90 degrees).
Low noise caused.
>>FEATURES
Employed same shaft & motor, occupied little space.
Designed of suction orifice for low suction resistance running smoothly, hi-stability & low noise level.
Equipped with forward-reverse rotating and 22 mm shaft dia, etc., for customer to select (ln general, shaft dia 19mm).
>>FEATURES
Combine the characteristics of both high and low pressure
pumps,appplicable to for high-low pressure system.
Power saving,low noise and smooth operation.Best choice for hydraulic system design for engineer.
Compactness,minimize space and energy saving.
Excellent performance gear pump could be used as a high pressure source or use as cooling system.
SAE standard flange.
Please refer to the table of single pump for performance figure.
>>FEATURES
Combine the characteristics of both high and low pressure
pumps,appplicable to for high-low pressure system.
Power saving,low noise and smooth operation.Best choice for hydraulic system design for engineer.
Compactness,minimize space and energy saving.
Excellent performance gear pump could be used as a high pressure source or use as cooling system.
SAE standard flange.
Please refer to the table of single pump for performance figure.
>>FEATURES
Test value of maximum pressure is based on petroleum base hydraulic oil.
Maximum Oil viscosity when operating with low speed:
SPEED 750/ 100mm2/cst , SPEED 950/ 100mm2/cst.
When the pressure is higher than 160 kgf/cm2,the rotation speed should be higher than 1450 rpm.
Test value of maximum pressure is based on petroleum base hydraulic oil.
Maximum Oil viscosity when operating with low speed:
SPEED 750/ 100mm2/cst , SPEED 950/ 100mm2/cst.
When the pressure is higher than 160 kgf/cm2,the rotation speed should be higher than 1450 rpm.
>>FEATURES
Test value of maximum pressure is based on petroleum base hydraulic oil.
Maximum Oil viscosity when operating with low speed:
SPEED 750/ 100mm2/cst , SPEED 950/ 100mm2/cst.
When the pressure is higher than 160 kgf/cm2,the rotation speed should be higher than 1450 rpm.
>>FEATURES
High Pressure,High efficency,applicable to any kinds to any kinds of
machines.
Low noise,agreeable to low-noise environmental requirement.
Wide displacement range,from 5.8 C.C. to 116 C.C. Satisfactory to all variety of machinery design.
Special Cartridge design,Easy Maintenance.
Double pump could be designed for double circuits or a circuit with cooling system.
>>FEATURES
Employed same shaft & motor and formed a hi-low pressure pump set.
Low noise level, large flow rate, low cost & hi-volumetric efficiency design.
